Display-devices SE-B Series Projector Sound Enclosure Manual de usuario descargar pdf

Sound Enclosure Lower Cavity Reversal

6/7/2005

In the following procedure, certain steps require two people.

Required tools: 7/16” box or socket wrench

11/32” nut driver or socket wrench

(2) Needle-nose vice grips

1. Place a packing blanket or cardboard on the floor to prevent scratching the

exterior of the enclosure.

2. Tilt the enclosure over on its flat side. The intake and exhaust ports should not

be on the floor.

3. Reaching in through the projection port, attach and lock a needle nose vice grips

to the (2) spring ends. Remove the 7/16” nut and washer. Carefully lift the

spring hook off the bolt and let it slowly retract. Leave the vice grips on the

spring end to prevent it from retracting into the spring housing. Do this for both

left and right springs.

1 2 3

Pagina 1

Sound Enclosure Lower Cavity Reversal 6/7/2005 1 In the following procedure, certain steps require two people. Required tools: 7/16” box

Sound Enclosure Lower Cavity Reversal 6/7/2005 2 4. This step requires two people. One holds the upper cavity still while the second perso

Sound Enclosure Lower Cavity Reversal 6/7/2005 3 6. Carefully lift the lower guide assembly off the threaded studs. Do not twist the gui

Sin comentarios

Display-devices SE-B Series Projector Sound Enclosure Manual de usuario